XFREE updaten

Hi. Ich würde gerne unter Linux spielen. Auf www.tweakcentral.de wird einem dazu geraten, Xfree upzudaten. Wenn ich allerdings das Update beendet habe, kommt nach "startx" folgene Fehlermeldung, bzw. Ausgabe.



XFree86 Version 4.0.2 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 18 December 2000
     If the server is older than 6-12 months, or if your card is
     newer than the above date, look for a newer version before
     reporting problems.  (See http://www.XFree86.Org/FAQ)Operating System: Linux 2.2.16-3smp i686 [ELF]
Module Loader present
(= Log file: "/var/log/XFree86.0.log", Time: Wed Mar 14 13:33:13 2001
(= Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (= default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (??) unknown.
(= ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "MAG Innovision|MAG DX1595"
(**) |   |-->Device "ELSA ERAZOR III"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc105"
(**) XKB: layout: "de"
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(= ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) NVidia Riva TNT2 rev 21, Mem @ 0xe4000000/24, 0xe6000000/25
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.1.8
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
     RIVATNT2 (Ultra), RIVATNT2 (Vanta), RIVATNT2 M64,
     RIVATNT2 (Integrated), GeForce 256, GeForce DDR, Quadro,
     GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra, Quadro 2 Pro,
     GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR, GeForce 2 Go
(--) Assigning device section with no busID to primary device
(--) Chipset RIVATNT2 found
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "RIVATNT2"
(**) NV(0): Depth 16, (--) framebuffer bpp 16
(= NV(0): RGB weight 565
(= NV(0): Default visual is TrueColor
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 0.1.0
(= NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE6000000
(--) NV(0): MMIO registers at 0xE4000000
(--) NV(0): VideoRAM: 32768 kBytes
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.2.0
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): I2C device "DDC:ddc2" registered.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): I2C device "DDC:ddc2" registered.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): DDC Monitor info: 0x829fc30
(II) NV(0): Manufacturer: MAG  Model: 5620  Serial#: 134287
(II) NV(0): Year: 1996  Week: 18
(II) NV(0): EDID Version: 1.1
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync:  Separate  Composite
(II) NV(0): Max H-Image Size [cm]: horiz.: 27  vert.: 20
(II) NV(0): Gamma: 2.50
(II) NV(0): DPMS capabilities: Suspend Off; RGB/Color Display
(II) NV(0): redX: 0.625 redY: 0.340   greenX: 0.310 greenY: 0.592
(II) NV(0): blueX: 0.149 blueY: 0.062   whiteX: 0.281 whiteY: 0.311
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) NV(0): end of DDC Monitor info

(= NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MAG Innovision|MAG DX1595: Using hsync range of 30.00-64.00 kHz
(II) NV(0): MAG Innovision|MAG DX1595: Using vrefresh range of 50.00-120.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(WW) NV(0): Default mode "1024x768" deleted (hsync out of range)
(WW) NV(0): Default mode "1152x864" deleted (hsync out of range)
(WW) NV(0): Default mode "1280x960" deleted (hsync out of range)
(WW) NV(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) NV(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) NV(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NV(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NV(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NV(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NV(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) NV(0): Default mode "1792x1344" deleted (hsync out of range)
(WW) NV(0): Default mode "1792x1344" deleted (hsync out of range)
(WW) NV(0): Default mode "1856x1392" deleted (hsync out of range)
(WW) NV(0): Default mode "1856x1392" deleted (hsync out of range)
(WW) NV(0): Default mode "1920x1440" deleted (hsync out of range)
(WW) NV(0): Default mode "1920x1440" deleted (hsync out of range)
(--) NV(0): Virtual size is 800x600 (pitch 800)
(**) NV(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NV(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(--) NV(0): Display dimensions: (27, 20) cm
(--) NV(0): DPI set to (75, 76)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
     compiled for 4.0.2, module version = 0.1.0
(= NV(0): Write-combining range (0xe6000000,0x2000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
     Screen to screen bit blits
     Solid filled rectangles
     8x8 mono pattern filled rectangles
     Indirect CPU to Screen color expansion
     Solid Lines
     Offscreen Pixmaps
     Setting up tile and stipple cache:
           32 128x128 slots
           32 256x256 slots
           16 512x512 slots
(= NV(0): Backing store disabled
(= NV(0): Silken mouse enabled
(**) NV(0): DPMS enabled
(**) Mouse1: Protocol: "PS/2"
(**) Mouse1: Core Pointer
(= Mouse1: Buttons: 3
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error:            Cannot open "compiled/server-0.xkm" to write keyboard description
>                   Exiting
Couldn't load XKB keymap, falling back to pre-XKB keymap
Could not init font path element unix/:-1, removing from list!

Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

X connection to :0.0 broken (explicit kill or server shutdown).

Distribution: Mandrake 7.2
Chip: TNT 2
Kann mir jemand helfen?

hi,

saug dir die aktuellen kernelmodule bei nvidia.com dann muesste es gehen

das beste ist du deinstallierst vorher alles (X) auch die conf files unter /etc/X11 etc.

und holst dir von mandrake die neuen xfree rpm's

cu okami